BOX PALLETIZING

Case palletizing with gripper

The boxes are transported to the pattern table using a feed conveyor. On the pattern table, rows of boxes are formed and when a row is complete, they are pushed aside to allow more. This process is repeated until a layer is complete, when a layer is finished the manipulator lowers and closes the gripper, the boxes hold pressure from the gripper. Once the boxes are held securely by the gripper, the manipulator moves horizontally across the pallet and lowers to deliver the layer of boxes.

Technical Data

Capacity for 400×600 mm box: 2.5 layers/minute and 10 boxes/minute.

Capacity for box 300×400 mm: 2.5 layers/minute and 12.5 boxes/minute.

Box palletizing with plate

The boxes are transported to the preparation table using a chain conveyor with box rotor. On the pattern table, each layer is created. When the layer is finished, it is transferred to a plate by a pusher.

The plate can move both horizontally and vertically. The layer is fed to the palletizing position, then the centering closes and the plate is moved and the layer is delivered.

Technical Data

Capacity for 400×600 mm box: 2.5 layers/minute and 10 boxes/minute.

Capacity for box 300×400 mm: 2.5 layers/minute and 12.5 boxes/minute.